Application
Recreational or Commercial
Corrosion Protection
Multiple anodes, all castings chromatized and layered with powder coatings
Engine Drive Shaft
Mounting flange available for several types of transmissions
Exhaust
None through the stern drive
Gear Ratios
1.43:1, 1.57:1, 1.79:1, and the 2.0:1 is available by special order
Lubrication
Full immersion, seven quarts with external reservoir
Propeller
Up to 508 mm (20 in) diameter
Rotation
Operates in either right or left hand rotation
Steering Angle
40° range
Torque Rating
Up to 1000 Nm (738 lb. ft.) input for recreational, lower for commercial applications
Torsional Coupling
Compact torsional coupling design reduces vibrations for quieter performance
Transmission
Reversing transmission required
Transom Mounting
Template available
Transom Requirements
14° angle nominal, 6.4 mm - 57.2 mm (1/4 in - 2-1/4 in) thick
Trim/Lift System
Approximate –6° to +10° trim, twin cylinders with electrohydraulic pump. Approximate 40° of total lift range
Warranty
Standard Warranty
Water Pickup
None through the stern drive
|
